MOUNTING OPTIONS. On slab or on the edge of the slab

BASE PROFILE DIMENSIONS: Profile made of extruded aluminum in 6060 T6 alloy, according to UNE EN-755-9, dimensions: Width 57 mm – Height 121.5 mm

GLASS SUPPORT: Through continuous PVC profile, and nylon wedges depending on glass thickness.

ANCHORS

• Expansion anchors – standard hexagonal head – in 8.8 steel, M10 x 110 mm.; Ø12mm.
  
• Variable number of anchors, depending on field of application and CTE DB SE-AE.

INSTALLATION: Installation must be carried out on cracked concrete of quality 25/30 (or higher), following the assembly guidelines indicated in the catalog, and the installation recommendations of the anchor manufacturer.

GLAZING:Laminated safety glass, 4 options:

• 8+8.2 (16.38 mm)
• 8+8.4 (17.52 mm)
• 10+10.2 (20.38 mm)
• 10+10.4 (21.52 mm)

JOINTS AND FINISHES: Glazing using EPDM joints, interior and exterior. Possibility of installing U-shaped upper handrail or round tube. Side covers in aluminum sheet.

Certifications according to CTE:
(According to DB SE-AE standard)

INSTALLATION ON FORGING – profile 09580

• • 09580M01, 0.8 KN/m: Use category: A1-A2-C1-C2-D1-D2-G1-G2
  • 09580M02, 1.6 KN/m: Use category:A1-A2-C1-C2-C3-C4-D1-D2-E-F-G1-G2

INSTALLATION TO THE EDGE OF FORGING – profile 09580

• • 09580M03, 0.8 KN/m: Use category: A1-A2-C1-C2-D1-D2-G1-G2
  • 09580M04, 1.6 KN/m: Use category: A1-A2-C1-C2-C3-C4-D1-D2-E-F-G1-G2
  • 09580M05, 3.0 KN/m: Use category: A1-A2-C1-C2-C3-C4-C5-D1-D2-E-F-G1-G2

INSTALLATION ON FORGING – profile 09581

• • 09581M01, 1.6 KN/m: Use category: A1-A2-C1-C2-C3-C4-D1-D2-E-F-G1-G2
  • 09581M04, 3.0 KN/m: Use category: A1-A2-C1-C2-C3-C4-C5-D1-D2-E-F-G1-G2